|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounted
Sample Pump
click photos for larger
view
| |
|
| |
|
Permanent Mounted Sample
Pump |
| |
• |
Handles wide pressure ranges from 14"Hg. to
10psig. |
| |
• |
Designed for Class 1, Div. 2,
Group C,D Area Classifications |
| |
• |
Long life pump and motor, 20,000
+ hrs. continuous |
| |
• |
Unique pump diaphragm that is virtually non
diffusive for low level trace
applications |
| |
• |
Power requirements: 12VDC @
700mA | |
|
|
价格咨询 |
咨询电话：+86 21 5899 9326 |
| |
|
|
|
Portable
Sample Pump
click photos for larger
view
| |
|
| |
|
Portable Sample
Pump |
| |
• |
Handles wide pressure ranges from 14"Hg. to
10psig. |
| |
• |
Designed for Class 1, Div. 2,
Group C,D Area Classifications |
| |
• |
Long life pump and motor, 20,000
+ hrs. continuous |
| |
• |
Unique pump diaphragm that is virtually non
diffusive for low level trace
applications |
| |
• |
Rechargeable NiCad batteries
operates for 4 hours continuously on a full
charge | |
|
|
价格咨询 |
咨询电话：+86 21 5899 9326 |
|
|
|
|
|
"Guardian" Liquid Rejection
Membrane
click photos for larger
view
| |
|
| |
|
"Guardian" Liquid Rejection
Membrane |
| |
• |
Unique membrane and diaphragm
design prevent the occasional slugs of liquid
gunk traveling down the gas pipeline from
flooding out expensive analytical equipment.
Prevents costly repair and down time. |
| |
• |
Break through check valve allows
gas to flow in one direction only. This prevents
"Air" from being drawn into a flammable gas
pipeline via the exhaust port in the event the
gas field suddenly experiences a vacuum
condition. |
| |
• |
Available with or without
pressure reducing regulator |
| |
• |
The Guardian automatically drains
liquids back into the pipeline without the need
for a bypass gas port, which wastes considerable
amounts of flammable gas. |
| |
|
| |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
|
|
|
Demister
click photos for larger
view
| |
|
| |
|
Demister |
| |
• |
Very efficiently cools hot
saturated sample gas to ambient temperature,
causing liquids to coalesce into droplets and
return via gravity back to the gas pipeline. The
Demister prevents liquids from accumulating down
stream in expensive analytical instruments
causing costly repairs and down time. |
| |
|
| |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
| |
|
|
Extreme weather
Enclosure
click photos for larger
view
| |
|
| |
|
Extreme Weather
Enclosure |
| |
• |
NEMA 4X Enclosure allows for our
heated Model 210BR, 2010BR and 3010BR to be
quickly and easily mounted in place for use in
extreme cold, wet and windy weather conditions
down to -40° F. |
| |
• |
Enclosure is predrilled,
insulated, powder coat painted and supplied with
all hardware for quick and simple installation.
|
| |
• |
Hardware includes: Explosion
proof couplings, explosion proof seal-offs,
316S.S. tubing and gas fittings. |
| |
• |
Dimensions: 21.5"W x 16.5"H x
6.5"D | |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
|
|
|
Flexible,
High Pressure,
Non-diffusive
Sample/Calibration
Tubing
click photos for larger
view
| |
|
| |
|
Flexible, High Pressure,
Non-diffusive Sample/Calibration Tubing |
| |
• |
This unique high pressure, non-diffusive
sample gas tubing is outfitted with special
connection fittings. Designed with an
o-ring/swage seal and requiring only finger
tightening, the tubing and fittings are rated up
to 6,500psig. It continues to provide a leak
tight seal even after thousands of connections
without causing damage to the female portion of
the compression fittings, generally attached to
the expensive gas analyzers. |
| |
• |
With conventional fittings,
damage often occurs after just one reconnection
simply due to the metal-to-metal swaging design,
resulting in gas leaks. Even very minute leaks
can wreak havoc with low level ppm oxygen
measurements. |
| |
• |
In addition, the plastic tubing
is filled with a Kevlar fiber making it
virtually non-diffusive and well suited for high
pressure applications. This makes for a perfect
choice when performing routine calibrations for
most gas analyzers, especially trace oxygen.
|
| |
• |
Other plastic tubing such as:
Teflon, Tygon, Nylon or Polyethylene diffuse
oxygen generally in the range of 2ppm to 100ppm
of oxygen per 15' lengths. The amount of
diffusion depends on temperature, flow and
pressure. Previously, low level trace oxygen
measurement required stainless steel or other
metallic tubing which is much too cumbersome and
prone to failure for routine
calibrations. |
| |
• |
Available for all 1/4" swage type
compression fittings. |
| |
• |
6,500psig. rating |
| |
|
| |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
|
|
|
Auxiliary
Power Adapter
click photos for larger
view
| |
|
| |
|
Auxiliary Power
Adapter |
| |
• |
Our auxiliary power adapter allows you to
recharge the batteries on all AMI portable gas
analyzers using the cigarette/auxiliary power
adapter in your vehicle. |
| |
• |
This handy accessory allows you
to keep working in the field without down time
in the event you forget to adequately charge
your batteries the night before and find
yourself miles away from AC
power. | |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
|
|
|
Protective
Carrying Case
click photos for larger
view
| |
|
| |
|
Protective Carrying
Case |
| |
• |
This rugged protective carrying
case extends the life of our portable gas
analyzers in the most demanding and hazardous
environments. |
| |
• |
It is lined with a thick die cut
foam providing complete protection to your
portable analyzer during travel and storage
periods. The die cut foam also has built in
compartments for the battery charger and quick
disconnect fitting, as well as the flexible
tubing and Liquid Rejection Probe accessories.
|
| |
• |
These compartments not only
protect them, they keep all the necessary
components together and organized.
| |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
|
|
|
Calibration
Gas Nipple with O-ring
click photos for larger
view
| |
|
| |
|
Calibration Gas Nipple with
O-ring |
| |
• |
This gas nipple with o-ring seal eliminates
common leaks associated with imperfect metal to
metal surfaces that are common when mating high
pressure gas cylinders to pressure reducing
regulators. |
| |
• |
Leaks of any type are
unacceptable while attempting to calibrate low
level trace oxygen analyzers. |
| |
• |
This inexpensive brass nipple and
o-ring combination provides a simple and
reliable solution to the common occurrence of
leaks produced by metal to metal connections.
|
| |
• |
This nipple will fit any pressure
reducing regulator inlet with a ¼" NPT inlet
port. | |
|
|
价格咨询 |
|
咨询电话：+86 21 5899 9326 | |
| |
| |
|
| | |
|
| |
|
